Welcome to Cosmos, our AI Assistant that will answer your questions about i GET IT.
How can we help you learn more about i GET IT?
To:
From:
Message:

Course Catalog

Course bundles start at $299

VIEW PLANS SKILLADVISOR

Filter By Category

Filter By Topic

Filter By Release

Filter By Skill Level



SOLIDWORKS 2024 Assemblies
image
Overview
In this course, you'll learn SOLIDWORKS assembly basics, such as inserting and managing assembly components. You'll discover more...different tools that are used to review, and quality check your assemblies, and you'll get to practice creating and modifying assemblies.

 6 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, Sketching, and Parts & Features courses before moving on to Assemblies.


View More Details
SOLIDWORKS 2024 Basics & User Interface
image
Overview
In this introductory SOLIDWORKS course, you will see what it's like to launch SOLIDWORKS for the first time, learn how to nav more...igate the user interface and perform essential commands, get an overview of opening and saving files, and explore System Options and Document Settings.

 3 hrs.    

Prerequisites

An installation of SOLIDWORKS 2023 or higher.


View More Details
SOLIDWORKS 2024 Drawings
image
Overview
In this course you will learn how to communicate your SOLIDWORKS designs using Drawings. You'll learn how to insert different more... types of model views and annotations, how to manage views and annotations, how to use Drawing Tables, and you'll get to practice creating various Drawing documents.

 8 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, Sketching, Parts & Features, and Assemblies courses before moving on to Drawings.


View More Details
SOLIDWORKS 2024 Essentials for New Users
image
Overview
This course is designed for both new and experienced users looking to learn the essentials for mechanical design in SOLIDWORK more...S. The five-part course includes: Getting Started with SOLIDWORKS & learning the User Interface, Sketching, Part & Feature creation, Assembly modeling, Drawing & Detailing. Small quizzes, and challenge projects, allow you to practice and reaffirm what you learn along the way. As with all i GET IT self-paced courses, you can start at the beginning, or jump to any section of the course as needed.

 24 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2024 Parts & Features
image
Overview
In this course, you'll learn how to turn sketch geometry into 3D geometry, practice creating Sketched and Applied Features, l more...earn about commonly used sketch tools, and you'll get to complete a series of modeling workshops to practice what you have learned.

 6 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, and Sketching, courses before moving on to Parts & Features.


View More Details
SOLIDWORKS 2024 Sheet Metal Design
image
Overview
This course is designed to teach you how to create and manage sheet metal parts in SOLIDWORKS. You'll learn some basic termin more...ology, industry methods used to design sheet metal parts, and even how to create sheet metal parts using top-down design techniques. Additionally, a number of specialized and unique applications are covered, including shell features, cylindrical parts, conical parts, lofts, reverse fold solutions, vents, and flat patterns. Upon completion of this course, you`ll be ready to create your own sheet metal parts using SOLIDWORKS.

 4 hrs.    

Prerequisites

An essentials-level capability in SOLIDWORKS.


View More Details
SOLIDWORKS 2024 Sketching
image
Overview
Learn the Basics of Sketching and Sketch Management required to begin modeling in SOLIDWORKS. You'll also learn more advanced more... sketching techniques, like Spline creation and 3D Sketching.

 24 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface course before moving on to Sketching.


View More Details
SOLIDWORKS Advanced Part Modeling Workshop
image
Overview
This is a short SOLIDWORKS Advanced Part Modeling Workshop which covers 3D sketch creations to create complicated models and more...multibody techniques. You will practice creating 3D sketches, plane creation, Sweep features, and explore multibody methods such as bridging, local operations, tool body, and use of the Combine tool.

 1 hrs.    

Prerequisites

SOLIDWORKS Essentials or any other 3D CAD Software


View More Details
SOLIDWORKS Updates for 2024 - What's New
image
Overview
This course covers 10 additional tools and commands in SOLIDWORKS for 2024. more...This course covers 10 additional tools and commands in SOLIDWORKS for 2024.

 1 hrs.    

Prerequisites

User should have knowledge regarding basic sketcher, modelling, assembly and drawing.


View More Details
SOLIDWORKS 2023 Assemblies
image
Overview
In this course, you'll learn SOLIDWORKS assembly basics like how to insert and manage assembly components, you'll discover di more...fferent tools used to review and quality check you assemblies, and you'll get to practice creating and modifying assemblies.

 6 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, Sketching, and Parts & Features courses before moving on to Assemblies.


View More Details
SOLIDWORKS 2023 Basics & User Interface
image
Overview
In this introductory SOLIDWORKS course, you will see what it's like to launch SOLIDWORKS for the first time, learn how to nav more...igate the user interface and perform essential commands, get an overview of opening and saving files, and explore System Options and Document Settings.

 3 hrs.    

Prerequisites

An installation of SOLIDWORKS 2016 or higher.


View More Details
SOLIDWORKS 2023 Drawings
image
Overview
In this course you will learn how to communicate your SOLIDWORKS designs using Drawings. You'll learn how to insert different more... types of model views and annotations, how to manage views and annotations, how to use Drawing Tables, and you'll get to practice creating various Drawing documents.

 8 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, Sketching, Parts & Features, and Assemblies courses before moving on to Drawings.


View More Details
SOLIDWORKS 2023 Essentials for New Users
image
Overview
This course is designed for both new and experienced users looking to learn the essentials for mechanical design in SOLIDWORK more...S. The five-part course includes: Getting Started with SOLIDWORKS & learning the User Interface, Sketching, Part & Feature creation, Assembly modeling, Drawing & Detailing. Small quizzes, and challenge projects, allow you to practice and reaffirm what you learn along the way. As with all i GET IT self-paced courses, you can start at the beginning, or jump to any section of the course as needed.

 24 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2023 Parts & Features
image
Overview
In this course, you'll learn how to turn sketch geometry into 3D geometry, practice creating Sketched and Applied Features, l more...earn about commonly used sketch tools, and you'll get to complete a series of modeling workshops to practice what you have learned.

 6 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, and Sketching, courses before moving on to Parts & Features.


View More Details
SOLIDWORKS 2023 Sketching
image
Overview
Learn the Basics of Sketching and Sketch Management required to begin modeling in SOLIDWORKS. You'll also learn more advanced more... sketching techniques, like Spline creation and 3D Sketching.

 24 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface course before moving on to Sketching.


View More Details
SOLIDWORKS Structure Systems - EV Battery Frame Workshop
image
Overview
Learn how to create SOLIDWORKS Structure Systems by modeling an Electric Vehicle Battery Frame. You'll learn how Structure Sy more...stems differ from typical Weldment designs, practice creating both Primary & Secondary structure members, practice applying Corner Treatment to adjoining members, learn how to create & insert custom Connection Elements, and practice managing & modifying a Structure System Cut List. Each unit guides users as they model their own version of the EV Battery Frame design. Quizzes will test and reinforce skills learned as you progress.

 4 hrs.    

Prerequisites

Basic knowledge of SOLIDWORKS parts creation.


View More Details
SOLIDWORKS Updates for 2019-2023
image
Overview
The SOLIDWORKS Updates for 2019-2023 course is designed to help you bridge the gap between SOLIDWORKS 2018 and 2023. You'll l more...earn about additions and enhancements made to the User Interface, Sketching, Parts & Features, Model Display, Sheet Metal, Weldments, Assemblies, Drawings & Detailing, and Import/Export options.

 3 hrs.    

Prerequisites

Knowledge of SOLIDWORKS fundamentals.


View More Details
SOLIDWORKS Updates for 2023 - What's New
image
Overview
This course covers 15 additional tools and commands in SOLIDWORKS for 2023. more...This course covers 15 additional tools and commands in SOLIDWORKS for 2023.

 1 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2022 Weldments
image
Overview
This course is designed to teach users how to model Weldment, or structural member designs, using SOLIDWORKS. You’ll learn ho more...w to create and manage weldments, apply weld beads, document your weldment designs with drawings, and you'll get to create a few weldment projects as well. Upon completion of this course, you’ll have the skills needed to model and detail a variety of weldment designs.

 3 hrs.    

Prerequisites

A basic level of competency in 3D sketching.


View More Details
SOLIDWORKS 2022 - What's New
image
Overview
This course covers 15 additional tools and commands in SOLIDWORKS for 2022. Including a new Threaded Stud Wizard, new Hybrid more...Modeling capabilities, triad control additions, sheet metal enhancements, weldment connection element creation, expanded End Cap support, and improvements to geometric tolerancing creation in drawings.

 1 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2022 Assemblies
image
Overview
In this course, you'll learn SOLIDWORKS assembly basics like how to insert and manage assembly components, you'll discover di more...fferent tools used to review and quality check you assemblies, and you'll get to practice creating and modifying assemblies.

 4 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, Sketching, and Parts & Features courses before moving on to Assemblies.


View More Details
SOLIDWORKS 2022 Drawings
image
Overview
In this course you will learn how to communicate your SOLIDWORKS designs using Drawings. You'll learn how to insert different more... types of model views and annotations, how to manage views and annotations, how to use Drawing Tables, and you'll get to practice creating various Drawing documents.

 4 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, Sketching, Parts & Features, and Assemblies courses before moving on to Drawings.


View More Details
SOLIDWORKS 2022 Essentials for New Users
image
Overview
This course is designed for both new and experienced users looking to learn the essentials for mechanical design in SOLIDWORK more...S. The five-part course includes: Getting Started with SOLIDWORKS & learning the User Interface, Sketching, Part & Feature creation, Assembly modeling, Drawing & Detailing. Small quizzes, and challenge projects, allow you to practice and reaffirm what you learn along the way. As with all i GET IT self-paced courses, you can start at the beginning, or jump to any section of the course as needed.

 24 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2022 Sheet Metal Design
image
Overview
This course is designed to teach you how to create and manage sheet metal parts in SOLIDWORKS. You'll learn some basic termin more...ology, industry methods used to design sheet metal parts, and even how to create sheet metal parts using top-down design techniques. Additionally, a number of specialized and unique applications are covered, including shell features, cylindrical parts, conical parts, lofts, reverse fold solutions, vents, and flat patterns. Upon completion of this course, you`ll be ready to create your own sheet metal parts using SOLIDWORKS.

 4 hrs.    

Prerequisites

An essentials-level capability in SOLIDWORKS.


View More Details
SOLIDWORKS 2022 Sketching
image
Overview
Learn the Basics of Sketching and Sketch Management required to begin modeling in SOLIDWORKS. You'll also learn more advanced more... sketching techniques, like Spline creation and 3D Sketching.

 0 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface course before moving on to Sketching.


View More Details
SOLIDWORKS 2021 - What's New
image
Overview
This course covers the top ten additions to SOLIDWORKS for 2021. Including new system options, user interface enhancements, f more...ile property options, weldment enhancements, component pattern options, and mate improvements.

 1 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2021 Assemblies
image
Overview
In this course, you'll learn SOLIDWORKS assembly basics like how to insert and manage assembly components, you'll discover di more...fferent tools used to review and quality check you assemblies, and you'll get to practice creating and modifying assemblies.

 4 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, Sketching, and Parts & Features courses before moving on to Assemblies.


View More Details
SOLIDWORKS 2021 Basics and User Interface
image
Overview
In this introductory SOLIDWORKS course, you will see what it's like to launch SOLIDWORKS for the first time, learn how to nav more...igate the user interface and perform essential commands, get an overview of opening and saving files, and explore System Options and Document Settings.

 1 hrs.    

Prerequisites

An installation of SOLIDWORKS 2016 or higher


View More Details
SOLIDWORKS 2021 Drawings
image
Overview
In this course you will learn how to communicate your SOLIDWORKS designs using Drawings. You'll learn how to insert different more... types of model views and annotations, how to manage views and annotations, how to use Drawing Tables, and you'll get to practice creating various Drawing documents.

 4 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, Sketching, Parts & Features, and Assemblies courses before moving on to Drawings.


View More Details
SOLIDWORKS 2021 Essentials for New Users
image
Overview
This course is designed for both new and experienced users looking to learn the essentials for mechanical design in SOLIDWORK more...S. The five-part course includes: Getting Started with SOLIDWORKS & learning the User Interface, Sketching, Part & Feature creation, Assembly modeling, Drawing & Detailing. Small quizzes, and challenge projects, allow you to practice and reaffirm what you learn along the way. As with all i GET IT self-paced courses, you can start at the beginning, or jump to any section of the course as needed.

 24 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2021 Mold Tool Design
image
Overview
This workshop covers the steps and processes needed to create a mold in SOLIDWORKS. You'll begin by learning some fundamental more...s of injection molding, followed by several videos detailing the steps required to create a part mold. You'll learn how to analyze a model to see if it's ready for mold creation, prepare a model for mold creation, and all the steps required to make the mold core, cavity and any side-cores. In addition to the main workshop example, you'll also get to practice making a few simple molds along the way.

 4 hrs.    

Prerequisites

Experience with advanced part modeling. Surfacing skills are a benefit, but not a requirement.


View More Details
SOLIDWORKS 2021 Parts & Features
image
Overview
In this course, you'll learn how to turn sketch geometry into 3D geometry, practice creating Sketched and Applied Features, l more...earn about commonly used sketch tools, and you'll get to complete a series of modeling workshops to practice what you have learned.

 4 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface, and Sketching, courses before moving on to Parts & Features.


View More Details
SOLIDWORKS 2021 Simulation Basics
image
Overview
This course covers SOLIDWORKS Simulation Basic, including understanding finite element analysis (FEA), the benefits to Simula more...tion, the different types of FEA analyses available with SOLIDWORKS Simulation and simplifying design studies. You will also learn how to perform and understand linear static analysis in detail.

 4 hrs.    

Prerequisites

An understanding of Statics, Strength of Materials, and how to navigate SOLIDWORKS. An active license of SOLIDWORKS Simulation Professional or Premium.


View More Details
SOLIDWORKS 2021 Sketching
image
Overview
Learn the Basics of Sketching and Sketch Management required to begin modeling in SOLIDWORKS. You'll also learn more advanced more... sketching techniques, like Spline creation and 3D Sketching.

 3 hrs.    

Prerequisites

Recommended: Complete the SOLIDWORKS Basics & User Interface course before moving on to Sketching.


View More Details
SOLIDWORKS Surface Design
image
Overview
The SOLIDWORKS Surface Design course is intended to teach users how to generate and repair complex surfaces using lofts, swee more...ps, and other surfacing tools. You'll also learn techniques for editing and managing surface geometry including trim, extend, fillet and knit surfaces. Upon completion of this course, you will be ready to start working on your own complex surface designs.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS


View More Details
SOLIDWORKS 2020 Essentials for New Users
image
Overview
This course is designed for both new and experienced users looking to learn the essentials needed to design in SOLIDWORKS. T more...he five-part course includes: Getting Started with SOLIDWORKS and learning the User Interface, Sketching, Part and Feature creation, Assembly modeling, and Drawing creation.

 24 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2020 Updates
image
Overview
SOLIDWORKS 2020: What's New will demonstrate the enhancements to the User Interface, Sketching, Parts and Features, and Assem more...blies from the previous version. These updates ad enhancements are driven by the SOLIDWORKS community as a need.

 2 hrs.    

Prerequisites

SOLIDWORKS Essentials, Prior version of SOLIDWORKS 2020


View More Details
SOLIDWORKS 2018 and 2019 Updates
image
Overview
The SOLIDWORKS Updates course will help you bridge the gap going from SOLIDWORKS 2017 to SOLIDWORKS 2018/2019. You'll learn more...about new enhancements and improvements made to the User Interface, Sketching, Parts & Features, Model Display, Assemblies, Drawings & Detailing, and Import/Export options and more. If you're moving to SOLIDWORKS 2019 from a version earlier than 2017, refer to additional Update courses in i GET IT to learn about more enhancements.

 3 hrs.    

Prerequisites

Knowledge of SOLIDWORKS fundamentals.


View More Details
SOLIDWORKS 2019 Assemblies
image
Overview
Learn SOLIDWORKS assembly basics and how to modify assemblies. more...Learn SOLIDWORKS assembly basics and how to modify assemblies.

 2 hrs.    

Prerequisites


View More Details
SOLIDWORKS 2019 Basics and User Interface
image
Overview
Explore opening the SOLIDWORKS software, navigating the user interface, overview of opening and saving files, and exploring S more...ystem Options and Document Settings.

 1 hrs.    

Prerequisites

Knowledge and experience of working with computers


View More Details
SOLIDWORKS 2019 Drawings
image
Overview
Learn how to communicate your design by learning SOLIDWORKS Basics, Annotations, Templates and Sheet Formats, assembly drawin more...gs, creating BOMs, drawing tables, performance and display options, and importing files and drawing references. Access the associated file bundle to compete the various Projects throughout this course and practice what you've learned. Only files associated i GET IT Projects will be provided.

 2 hrs.    

Prerequisites


View More Details
SOLIDWORKS 2019 Essentials for New Users
image
Overview
This course is designed for both new and experienced users looking to learn the essentials needed to design in SOLIDWORKS. T more...he five-part course includes: Getting Started with SOLIDWORKS and learning the User Interface, Sketching, Part and Feature creation, Assembly modeling, and Drawing creation.

 16 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2019 Parts and Features
image
Overview
Learn how to create 3D geometry after setting up your sketching profiles learned in the previous course, explore sketched and more... applied features, commonly used sketch tools, and run through a series of modeling workshops to practice what you have learned.

 3 hrs.    

Prerequisites

Previous two courses: SOLIDWORKS Basics and User Interface and SOLIDWORKS Sketching.


View More Details
SOLIDWORKS 2019 Sketching
image
Overview
Learn how to create your design by learning about Basics of Sketching, Management, Splines, and 3D Sketching and at the end p more...ractice what you have learned.

 3 hrs.    

Prerequisites

SOLIDWORKS Basics and User Interface course


View More Details
SOLIDWORKS 2019 Updates
image
Overview
The SOLIDWORKS 2019 Updates course is designed to help you bridge the gap between SOLIDWORKS 2018 and 2019. You'll learn abou more...t additions and enhancements made to the User Interface, Sketching, Parts & Features, Model Display, Assemblies, Drawings & Detailing, and Import/Export options. If you're moving to 2019 from a version earlier than 2018, refer to additional Update courses in i GET IT to learn about more enhancements.

 1 hrs.    

Prerequisites

Knowledge of SOLIDWORKS fundamentals.


View More Details
SOLIDWORKS Composer Workshops
image
Overview
This course is divided into four separate workshops illustrating different 'deliverables' SW Composer is capable of producing more.... You'll learn how to create Product Manuals, Marketing Images, Product Animations, and how to embed 3D models into a MS Word document. Workshops are recorded live, and are divided into smaller segments so you can review each video at your own pace.

 7 hrs.    

Prerequisites

Installations of SOLIDWORKS Composer and MS Word


View More Details
SOLIDWORKS Managing Large Assemblies
image
Overview
The Managing Large Assemblies course is intended to teach users about the SOLIDWORKS tools, techniques, and features designed more... to help manage large assemblies and make them efficient. You will learn how to configure and setup your workstation and also learn assembly structure organization techniques to help you work more efficiently. You will also practice creating configurations to facilitate quicker and easier access to components. Upon completion of this course, you will have the knowledge and skills necessary to work efficiently and effectively in large assemblies. Included in this course are the best practices for modeling techniques to create faster performing parts.

 4 hrs.    

Prerequisites

An Essentials level of competency in SOLIDWORKS.


View More Details
SOLIDWORKS Mold Tool Design
image
Overview
This workshop covers the steps and processes needed to create a mold in SOLIDWORKS. You'll begin by learning some fundamental more...s of injection molding, followed by several videos detailing the steps required to create a part mold. You'll learn how to analyze a model to see if it's ready for mold creation, prepare a model for mold creation, and all the steps required to make the mold core, cavity and any side-cores. In addition to the main workshop example, you'll also get to practice making a few simple molds along the way.

 2 hrs.    

Prerequisites

Experience with advanced part modeling. Surfacing skills are a benefit, but not a requirement.


View More Details
SOLIDWORKS MBD & DimXpert
image
Overview
This course covers the basics of creating and communicating Product Manufacturing Information, or PMI, using SOLIDWORKS MBD a more...nd DimXpert tools. You'll learn what SOLIDWORKS Model Based Definition is, how to attach dimensions and other annotations to a model, how to view and manage annotation views, specialized PMI techniques, how to create custom 3D PDF templates and publish them, and how view 3D PDFs and eDrawings once they've been created.

 3 hrs.    

Prerequisites

An intermediate level of knowledge in SOLIDWORKS. (Note that an MBD license is required to enable all capabilities.)


View More Details
SOLIDWORKS 2018 Assemblies
image
Overview
The SOLIDWORKS Assemblies course is intended for users who have learned the essentials of part creation in SOLIDWORKS and wan more...t to advance to assembly creation. Upon completion of this course, you should have the knowledge required to successfully build and manage SOLIDWORKS assembly documents.

 2 hrs.    

Prerequisites

An essentials-level knowledge of sketching and part modeling


View More Details
SOLIDWORKS 2018 Basics and User Interface
image
Overview
In this course, you will explore the main user interface in SOLIDWORKS and learn how to access various commands. You'll also more...learn to create and manage document templates, and discover how to explore all aspects of your design in both 2D and 3D environments. This course is the first in the essentials training for SOLIDWORKS 2018. Once complete, move on to the SOLIDWORKS 2018 Sketching course.

 1 hrs.    

Prerequisites

None


View More Details
SOLIDWORKS 2018 Drawings & Detailing
image
Overview
This course is intended to teach SOLIDWORKS users how to create engineering drawings for parts and assemblies using SOLIDWORK more...S. Upon completion of this course, you should have the knowledge required to successfully create and manage SOLIDWORKS drawing documents.

 4 hrs.    

Prerequisites

An essentials-level understanding of part or assembly modeling with SOLIDWORKS


View More Details
SOLIDWORKS 2018 Essentials for New Users
image
Overview
This course is designed for both new and experienced users looking to learn the essentials needed to design in SOLIDWORKS. T more...he five-part course includes: Getting Started with SOLIDWORKS and learning the User Interface, Sketching, Part and Feature creation, Assembly modeling, and Drawing creation.

 16 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2018 Parts & Features
image
Overview
The SOLIDWORKS Parts & Features course is intended for users who have learned the essentials of sketching in SOLIDWORKS and w more...ant to advance to part and feature creation. Upon completion of this course you'll have the knowledge required to create 3D part documents in SOLIDWORKS, preparing you to move on to assembly and/or drawing creation.

 3 hrs.    

Prerequisites

SOLIDWORKS Sketching


View More Details
SOLIDWORKS 2018 Sketching
image
Overview
This course provides you with the basics and best practices used when creating sketches in SOLIDWORKS . You'll learn how to u more...se the various sketching commands, how to sketch efficiently, and how to manage your sketches. Upon completion of this course, you should have the knowledge required to successfully create and manage a variety of sketch geometry using SOLIDWORKS.

 3 hrs.    

Prerequisites

Completion of the Getting Started with SOLIDWORKS course in i GET IT.


View More Details
SOLIDWORKS 2018 Surface Design
image
Overview
The SOLIDWORKS Surface Design course is intended to teach users how to generate and repair complex surfaces using lofts, swee more...ps, and other surfacing tools. You'll also learn techniques for editing and managing surface geometry including trim, extend, fillet and knit surfaces. Upon completion of this course, you will be ready to start working on your own complex surface designs.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS


View More Details
SOLIDWORKS 2018 Updates
image
Overview
This course will help you close knowledge gaps between SOLIDWORKS 2017 and 2018. You will learn about the latest enhancements more... to Mouse Gestures, Reference Geometry, 3D Sketching, Sheet Metal and more.

 1 hrs.    

Prerequisites

An Essentials-level of SOLIDWORKS knowledge.


View More Details
SOLIDWORKS Vice Assembly QuickStart
image
Overview
Follow along and watch as a Woodworker's Vise is built from scratch using SOLIDWORKS. Using this single example, you'll see h more...ow to create part models using sketch and feature geometry, how to combine those parts to create assemblies, how to detail those models using drawings and more. Note that this course DOES NOT cover "every pick and click" in SOLIDWORKS. It's designed to quickly cover the fundamentals of the program, requiring you to fill in some knowledge gaps yourself. It's suggested that you learn the Essentials of SOLIDWORKS (Sketching, Parts & Features, Assemblies and Drawings) before taking this course. To do so, refer to the SOLIDWORKS Essentials courses within i GET IT.

 3 hrs.    

Prerequisites

None


View More Details
SOLIDWORKS Weldments
image
Overview
This course is designed to teach users how to model Weldment, or structural member designs, using SOLIDWORKS. You’ll learn ho more...w to create and manage weldments, apply weld beads, document your weldment designs with drawings, and you'll get to create a few weldment projects as well. Upon completion of this course, you’ll have the skills needed to model and detail a variety of weldment designs.

 3 hrs.    

Prerequisites

A basic level of competency in 3D sketching.


View More Details
SOLIDWORKS 2015 - 2017 Updates
image
Overview
This course will help you close any knowledge gaps between SOLIDWORKS 2015 to SOLIDWORKS 2017. You will learn about the lates more...t enhancements, including topics on User Interface, Sketching, Parts & Features, Assemblies, Sheet Metal and Drawings & Detailing.

 3 hrs.    

Prerequisites


View More Details
SOLIDWORKS 2017 - Routing an Electrical Conduit
image
Overview
This SOLIDWORKS 2017 Electrical Conduit Routing Workshop will guide and teach you how to create a conduit route of a garden l more...ight layout. It will cover setting up the routing environment, overview of the design library, using routing commands, adding wiring information and then creating a drawing of the design. You will also be challenged with a project that will let you apply what you learned in creating a conduit route of a ceiling fan.

 1 hrs.    

Prerequisites

You must have gone through SOLIDWORKS Essentials training or have a minimal of 8 hours of basic SOLIDWORKS experience.


View More Details
SOLIDWORKS 2017 Assemblies
image
Overview
The SOLIDWORKS 2017 Assemblies course is intended for users who have learned the essentials of part creation in SOLIDWORKS an more...d want to advance to assembly creation. Upon completion of this course, you should have the knowledge required to successfully build and manage SOLIDWORKS assembly documents. Users will review video lessons detailing the various processes and procedures used to create assemblies, while intermittent project lessons and quizzes let you practice and reaffirm what you learn.

 2 hrs.    

Prerequisites

An essentials-level knowledge of sketching and part modeling.


View More Details
SOLIDWORKS 2017 Basics & User Interface
image
Overview
This course will introduce you to the SOLIDWORKS 2016+ User Interface so you can become familiar using the software and learn more... where to go for help. This course is the first in the i GET IT Essentials Learning Path. Now get ready to start transforming your ideas in to reality.

 1 hrs.    

Prerequisites

Knowledge with Windows-based software, Installation of Windows 8.1+ 64-Bit, Installation of SolidWorks 2016+. Laptop of Tower Workstation Recommended, along with NVIDIA Quadro Graphics Card, and Dual-monitor setup which helps tremendously with productivity is also recommended.


View More Details
SOLIDWORKS 2017 Drawings
image
Overview
This course is intended to teach SOLIDWORKS users how to create engineering drawings for parts and assemblies using SOLIDWORK more...S. Upon completion of this course, you should have the knowledge required to successfully create and manage SOLIDWORKS drawing documents. Users will review video lessons detailing processes and procedures used to create drawing documents, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 4 hrs.    

Prerequisites

Designers and engineers looking to gain a detailed understanding of drawings in SOLIDWORKS.


View More Details
SOLIDWORKS 2017 Essentials for New Users
image
Overview
This course is designed for both new and experienced users looking to learn the essentials needed to design in SOLIDWORKS. T more...he five-part course includes: Getting Started with SOLIDWORKS and learning the User Interface, Sketching, Part and Feature creation, Assembly modeling, and Drawing creation.

 16 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2017 Mold Tool Design
image
Overview
This workshop covers the steps and processes needed to create a mold in SOLIDWORKS. You'll begin by learning some fundamenta more...ls of injection molding, followed by several videos detailing the steps required to create a part mold. You'll learn how to analyze a model to see if it's ready for mold creation, prepare a model for mold creation, and all the steps required to make the mold core, cavity and any side-cores. In addition to the main workshop example, you'll also get to practice making a few simple molds along the way.

 2 hrs.    

Prerequisites

Experience with advanced part modeling. Surfacing skills are a benefit, but not a requirement.


View More Details
SOLIDWORKS 2017 Parts and Features
image
Overview
The SOLIDWORKS 2017 Parts & Features course is intended for users who have learned the essentials of sketching in SOLIDWORKS more...and want to advance to part and feature creation. Upon completion of this course you should have the knowledge required to create 3D part documents in SOLIDWORKS, thus preparing you to move on to assembly and/or drawing creation. Users will review video lessons detailing the various processes and procedures used to model SOLIDWORKS parts. Intermittent text-based projects, along with unit quizzes, let you practice and reaffirm what you learn as you progress.

 3 hrs.    

Prerequisites

SOLIDWORKS 2017 Basics & User Interface, Sketching. Some knowledge of 3D CAD software and familiar with Windows 8.1/10.


View More Details
SOLIDWORKS 2017 QuickStart
image
Overview
Follow along and watch as a Woodworker's Vise is built from scratch using SOLIDWORKS 2017. Using this single example, you'll more...see how to create part models using sketch and feature geometry, how to combine those parts to create assemblies, how to detail those models using drawings and more. Note that this course DOES NOT cover "every pick and click" in SOLIDWORKS. It's designed to quickly cover the fundamentals of the program, requiring you to fill in some knowledge gaps yourself. It's suggested that you learn the Essentials of SOLIDWORKS (Sketching, Parts & Features, Assemblies and Drawings) before taking this course. To do so, refer to the SOLIDWORKS Essentials courses within i GET IT.

 3 hrs.    

Prerequisites

None


View More Details
SOLIDWORKS 2017 Sheet Metal Design
image
Overview
This course is designed to teach you how to create and manage sheet metal parts in SOLIDWORKS. You'll learn some basic termin more...ology, industry methods used to design sheet metal parts, and even how to create sheet metal parts using top-down design techniques. Additionally, a number of specialized and unique applications are covered, including shell features, cylindrical parts, conical parts, lofts, reverse fold solutions, vents, and flat patterns. Upon completion of this course, you`ll be ready to create your own sheet metal parts using SOLIDWORKS.

 4 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2017.


View More Details
SOLIDWORKS 2017 Sketching
image
Overview
This course provides you with the basics and best practices used when creating sketches in SOLIDWORKS . You will learn how to more... use the various sketching commands, how to sketch efficiently, and how to manage your sketches. You will also study sketch blocks, splines and 3D sketches. Users will review video lessons detailing the various processes and procedures used to sketch model geometry, while intermittent project lessons let you practice and reaffirm what you learn. Upon completion of this course, you should have the knowledge required to successfully create and manage sketches in SOLIDWORKS .

 2 hrs.    

Prerequisites

SOLIDWORKS 2016 or 2017 Installation


View More Details
SOLIDWORKS 2017 Surface Design
image
Overview
The SOLIDWORKS Surface Design course is intended to teach users how to generate and repair complex surfaces using lofts, swee more...ps, and other surfacing tools. You`ll also learn techniques for editing and managing surface geometry including trim, extend, fillet and knit surfaces. Upon completion of this course, you will be ready to start working on your own complex surface designs.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS


View More Details
SOLIDWORKS 2017 Top-down Design
image
Overview
This course is designed to teach SOLIDWORKS users how to create parts in the context of an assembly document. Also known as T more...op-down Design, designing in the context of an assembly allows you to leverage existing model geometry to facilitate your designs. Upon completion of this course you'll be ready to start creating your own Top-down designs in SOLIDWORKS.

 2 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS, or completion of i GET IT's SOLIDWORKS Essentials level classes.


View More Details
SOLIDWORKS 2017 Updates
image
Overview
This course will help you close any knowledge gaps between SOLIDWORKS 2017. You will learn about the latest enhancements, inc more...luding topics on User Interface, Sketching, Parts & Features, Assemblies, Sheet Metal and Drawings & Detailing.

 1 hrs.    

Prerequisites

An existing SOLIDWORKS user.


View More Details
SOLIDWORKS 2017 Weldments
image
Overview
This course is designed to teach users how to create Weldments, also known as structural member designs, in SOLIDWORKS. You’l more...l learn how to create and manage weldments, apply weld beads, document your weldment designs in drawings, and you'll get to create a few weldment projects. Upon completion of this course, you’ll have the skills needed to model weldments using SOLIDWORKS.

 3 hrs.    

Prerequisites

A basic level of competency in 3D sketching.


View More Details
Sketch Blocks in SOLIDWORKS 2016
image
Overview
This course is designed to teach you the basics of creating and managing Sketch Blocks, or Blocks, in SOLIDWORKS 2016. Upon c more...ompletion, you should be proficient enough to utilize all of the sketch block commands, as well as be able to identify many design applications where applying blocks can beneficial.

 1 hrs.    

Prerequisites

None


View More Details
SOLIDWORKS 2016 Assemblies
image
Overview
The SOLIDWORKS 2016 Assemblies course is intended for users who have learned the essentials of part creation in SOLIDWORKS an more...d want to advance to assembly creation. Upon completion of this course, you should have the knowledge required to successfully build and manage SOLIDWORKS assembly documents. Users will review video lessons detailing the various processes and procedures used to create assemblies, while intermittent project lessons and quizzes let you practice and reaffirm what you learn.

 2 hrs.    

Prerequisites

An essentials-level knowledge of sketching and part modeling.


View More Details
SOLIDWORKS 2016 Basics and User Interface
image
Overview
This course will introduce you to the SOLIDWORKS 2016 User Interface so you can become familiar using the software and learn more...where to go for help. This course is the first in the i GET IT Essentials Learning Path. Now get ready to start transforming your ideas in to reality.

 1 hrs.    

Prerequisites

Knowledge with Windows-based software, Installation of Windows 8.1 64-Bit, Installation of SolidWorks 2016, Workstation Recommended (NVIDIA Quadro Graphics Card), and Dual-monitor setup Recommended.


View More Details
SOLIDWORKS 2016 Drawings
image
Overview
This course is intended to teach SOLIDWORKS users how to create engineering drawings for parts and assemblies using SOLIDWORK more...S 2016. Key topics include: part drawings, assembly drawings, orthographic views, dimensions and annotations, layers, notes, blocks, perspective views, hide/show components, drawing sheets, flat pattern views, section views, cutaway section views, broken views, drawing templates, ballooning, tables, detached drawings, edge display, importing DXF/DWG data, and drawing references. Upon completion of this course, you should have the knowledge required to successfully create and manage SOLIDWORKS drawing documents. Users will review video lessons detailing the various processes and procedures used to create drawings, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 4 hrs.    

Prerequisites

Designers and engineers looking to gain a detailed understanding of drawings in SOLIDWORKS 2016 in order to convey their model designs.


View More Details
SOLIDWORKS 2016 Essentials for Users
image
Overview
This course is designed for new users or experienced users looking to learn the essentials of using SOLIDWORKS and is a combi more...nation of all the parts that make up our Essentials Learning Path. The five-part series is combined to include: Getting Started in the Interface, Sketching, Parts and Features, Assemblies, and Drawings.

 16 hrs.    

Prerequisites

None.


View More Details
SOLIDWORKS 2016 Motion Fundamentals
image
Overview
This course is designed to teach you the fundamentals of creating and running Motion studies for your SOLIDWORKS models, from more... simple animations to dynamic motion analyses. You will learn what Motion is and what you can do with it, the basic concepts involved in a motion study, how to define contact & friction, CAM integration, motion optimization, and how Motion integrates with SOLIDWORKS Simulation. Note that this course was created in SOLIDWORKS 2015 and is still valid for SOLIDWORKS 2016 as the functionality remains the same.

 4 hrs.    

Prerequisites

A clear understanding of SOLIDWORKS assembly modeling. An understanding of basic physical principles will be helpful, but is not required.


View More Details
SOLIDWORKS 2016 Parts and Features
image
Overview
The SOLIDWORKS 2016 Parts & Features course is intended for users who have learned the essentials of sketching in SOLIDWORKS more...and want to advance to part and feature creation. Upon completion of this course you should have the knowledge required to create 3D part documents in SOLIDWORKS, thus preparing you to move on to assembly and/or drawing creation. Users will review video lessons detailing the various processes and procedures used to model SOLIDWORKS parts. Intermittent text-based projects, along with unit quizzes, let you practice and reaffirm what you learn as you progress.

 3 hrs.    

Prerequisites

An essentials-level knowledge of SOLIDWORKS sketching.


View More Details
SOLIDWORKS 2016 Quickstart
image
Overview
This Quick Start course is meant to get you started creating parts quickly by a process-based learning approach. You will gai more...n understanding of how SOLIDWORKS functions and familiarize yourself with commonly used commands and best practices. The projects at the end of each unit will help you practice on your own and allow you to explore the commands more. There will be a challenge project in the end that will tie in all the units, Sketching, Modeling, Assemblies and Drawings.

 2 hrs.    

Prerequisites

Basic Computer knowledge.


View More Details
SOLIDWORKS 2016 Sheet Metal Design
image
Overview
This course was created to teach you how use the tools provided in SOLIDWORKS for sheet metal part design. Learn how to creat more...e drawings of sheet metal parts as well as how to create sheet metal parts using top-down design techniques. Additionally, a number of specialized and unique applications of sheet metal parts are covered, including shell features, cylindrical parts, conical parts, lofts, reverse fold solutions, vents, and flat patterns. Upon completion of this course, you`ll be ready to create your own sheet metal parts in SolidWorks 2016.

 4 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2016 and Sheet Metal fabrication.


View More Details
SOLIDWORKS 2016 Sketching
image
Overview
This course provides you with the basics and best practices used when creating sketches in SOLIDWORKS . You will learn how to more... use the various sketching commands, how to sketch efficiently, and how to manage your sketches. You will also study sketch blocks, splines and 3D sketches. Users will review video lessons detailing the various processes and procedures used to sketch model geometry, while intermittent project lessons let you practice and reaffirm what you learn. Upon completion of this course, you should have the knowledge required to successfully create and manage sketches in SOLIDWORKS .

 2 hrs.    

Prerequisites

SOLIDWORKS 2016


View More Details
SOLIDWORKS 2016 Updates
image
Overview
This course will help you close any knowledge gaps between your version of SOLIDWORKS and SOLIDWORKS 2016. You will learn abo more...ut the latest enhancements, including topics on User Interface, Sketching, Parts & Features, Assemblies, Sheet Metal and Drawings & Detailing.

 3 hrs.    

Prerequisites


View More Details
SOLIDWORKS 2016 Weldments
image
Overview
This course is designed to teach users how to create Weldments, also known as structural member designs, in SOLIDWORKS 2016. more...You’ll learn how to create and manage weldments, apply weld beads, document your weldment designs in drawings, and you'll get to create a few weldment projects. Upon completion of this course, you’ll have the skills needed to model weldments using SOLIDWORKS 2016.

 3 hrs.    

Prerequisites

A basic level of competency in 3D sketching.


View More Details
SOLIDWORKS Surface Design
image
Overview
The SOLIDWORKS Surface Design course is intended to teach users how to generate and repair complex surfaces using lofts, swee more...ps, and other surfacing tools. You`ll also learn techniques for editing and managing surface geometry including trim, extend, fillet and knit surfaces. Upon completion of this course, you will be ready to start working on your own complex surface designs. Note that this course was captured in SOLIDWORKS 2015 and remains valid for SOLIDWORKS 2016.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS


View More Details
Routing an Electrical Conduit in SOLIDWORKS 2015
image
Overview
This SOLIDWORKS 2015 Electrical Conduit Routing Workshop will guide and teach you how to create a conduit route of a garden l more...ight layout. It will cover setting up the routing environment, overview of the design library, using routing commands, adding wiring information and then creating a drawing of the design. You will also be challenged with a project that will let you apply what you learned in creating a conduit route of a ceiling fan.

 1 hrs.    

Prerequisites

You must have gone through SOLIDWORKS Essentials training or have a minimal of 8 hours of basic SOLIDWORKS experience.


View More Details
SOLIDWORKS 2015 Assemblies
image
Overview
The SOLIDWORKS 2015 Assemblies course is intended for users who have learned the essentials of part creation in SOLIDWORKS an more...d want to advance to assembly creation. Upon completion of this course, you should have the knowledge required to successfully build and manage SOLIDWORKS assembly documents. Users will review video lessons detailing the various processes and procedures used to create assemblies, while intermittent project lessons and quizzes let you practice and reaffirm what you learn.

 3 hrs.    

Prerequisites

An essentials-level knowledge of sketching and part modeling.


View More Details
SOLIDWORKS 2015 Drawings
image
Overview
This course is intended to teach SOLIDWORKS users how to create engineering drawings for parts and assemblies using SOLIDWORK more...S 2015. Key topics include: part drawings, assembly drawings, orthographic views, dimensions and annotations, layers, notes, blocks, perspective views, hide/show components, drawing sheets, flat pattern views, section views, cutaway section views, broken views, drawing templates, ballooning, tables, detached drawings, edge display, importing DXF/DWG data, and drawing references. Upon completion of this course, you should have the knowledge required to successfully create and manage SOLIDWORKS drawing documents. Users will review video lessons detailing the various processes and procedures used to create drawings, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 4 hrs.    

Prerequisites

Designers and engineers looking to gain a detailed understanding of drawings in SOLIDWORKS 2015.


View More Details
SOLIDWORKS 2015 Essentials for New Users
image
Overview
The SOLIDWORKS Essentials course is intended for users to learn basic topics such as sketching, parts & features, modificatio more...ns, assemblies, tools, and drawings. Upon completion of this course, you should have a solid foundation to help you get started designing in SOLIDWORKS. Users will be presented with detailed lessons, procedures, projects and quizzes to practice what you have learned. After completing the course, an assessment is available for users to test their knowledge and see what topics they need to review.

 10 hrs.    

Prerequisites

None


View More Details
SOLIDWORKS 2015 Mold Tool Design
image
Overview
This course is a workshop that you will follow along to analyze a model and ensure that it will eject successful from the mol more...d. Then you will create the mold tool along with any side cores and then create an assembly from it.

 1 hrs.    

Prerequisites

SolidWorks Essentials, Surface Design, and Advanced Part Modeling


View More Details
SOLIDWORKS 2015 Motion
image
Overview
This course is designed to teach you the fundamentals of creating and running Motion studies for your SOLIDWORKS models, from more... simple animations to dynamic motion analyses. You will learn what Motion is and what you can do with it, the basic concepts involved in a motion study, how to define contact & friction, CAM integration, motion optimization, and how Motion integrates with SOLIDWORKS Simulation.

 4 hrs.    

Prerequisites

A clear understanding of SOLIDWORKS assembly modeling. An understanding of basic physical principles will be helpful, but is not required.


View More Details
SOLIDWORKS 2015 Parts and Features
image
Overview
The SOLIDWORKS 2015 Parts & Features course is intended for users who have learned the essentials of sketching in SOLIDWORKS more...and want to advance to part and feature creation. Upon completion of this course you should have the knowledge required to create 3d part documents in SOLIDWORKS, thus preparing you to move on to assembly and/or drawing creation. Users will review video lessons detailing the various processes and procedures used to model SOLIDWORKS parts. Intermittent text-based projects, along with unit quizzes, let you practice and reaffirm what you learn as you progress.

 4 hrs.    

Prerequisites

An essentials-level knowledge of SOLIDWORKS sketching.


View More Details
SOLIDWORKS 2015 Sheet Metal Design
image
Overview
This course was created to teach you how use the tools provided in SOLIDWORKS for sheet metal part design. Learn how to creat more...e drawings of sheet metal parts as well as how to create sheet metal parts using top-down design techniques. Additionally, a number of specialized and unique applications of sheet metal parts are covered, including shell features, cylindrical parts, conical parts, lofts, reverse fold solutions, vents, and flat patterns. Upon completion of this course, you`ll be ready to create your own sheet metal parts in SolidWorks 2015.

 4 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2015 and Sheet Metal fabrication.


View More Details
SOLIDWORKS 2015 Sketching
image
Overview
The SOLIDWORKS 2015 Sketching course provides you with the basics and best practices used when creating sketches in SOLIDWORK more...S . You will learn how to use the various sketching commands, how to sketch efficiently, and how to manage your sketches. You will also study sketch blocks, splines and 3D sketches. Upon completion of this course, you should have the knowledge required to successfully create and manage sketches in SOLIDWORKS . Users will review video lessons detailing the various processes and procedures used to sketch model geometry, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS or completion of i GET IT`s SOLIDWORKS Essentials for Users.


View More Details
SOLIDWORKS 2015 Surface Design
image
Overview
The SOLIDWORKS 2015 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You`ll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you`ll be ready to start working with complex surfaces.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS .


View More Details
SOLIDWORKS 2015 Update from 2014
image
Overview
The SOLIDWORKS 2015 Update from 2014 course is intended to help users learn what`s new in SOLIDWORKS 2015. This course explor more...es changes and enhancements to the user interface, SOLIDWORKS fundamentals; including sketching, parts and features, assemblies, and drawings, and specialized topics like weldments and sheet metal. With the completion of this course, you will be familiar with the new features in SOLIDWORKS 2015.

 4 hrs.    

Prerequisites

A fundamentals level of experience (Sketching, Parts & Features, Assemblies, and Drawings) with prior versions of SOLIDWORKS.


View More Details
SOLIDWORKS 2015 Weldments
image
Overview
This course is designed to teach users how to work with weldments in SOLIDWORKS 2015. You’ll learn how to create weldments, a more...pply welds, manage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SOLIDWORKS 2015 for your weldments. The course duration is approximately 3 hours and 30 minutes.

 3 hrs.    

Prerequisites

A basic knowledge of SOLIDWORKS 2015 modeling practices and working in the 3D Sketching Environment.


View More Details
SOLIDWORKS DriveWorks Xpress
image
Overview
One of the best tools for design automation included with SOLIDWORKS is DriveWorks Xpress. In this course, you`ll learn how e more...asy it is to design for multiple model variations using DriveWorks Xpress, replacing the need for models with large and complex configurations. Key Topics include creating a DriveWorks Xpress database, capturing model data, creating an input form, and creating rules to drive model variations.

 2 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2015 and equation definitions.


View More Details
SOLIDWORKS 2014 Assemblies
image
Overview
The SOLIDWORKS 2014 Assemblies course is intended for users who have learned the essentials of part creation in SOLIDWORKS an more...d want to advance to assembly creation. Upon completion of this course, you should have the knowledge required to successfully build and manage SOLIDWORKS assembly documents. Users will review video lessons detailing the various processes and procedures used to create assemblies, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 3 hrs.    

Prerequisites

An essentials-level knowledge of sketching and part modeling.


View More Details
SOLIDWORKS 2014 Drawings
image
Overview
This course is intended to teach SOLIDWORKS users how to create engineering drawings for parts and assemblies using SOLIDWORK more...S 2014. Key topics include: part drawings, assembly drawings, orthographic views, dimensions and annotations, layers, notes, blocks, perspective views, hide/show components, drawing sheets, flat pattern views, section views, cutaway section views, broken views, drawing templates, ballooning, tables, detached drawings, edge display, importing DXF/DWG data, and drawing references. Upon completion of this course, you should have the knowledge required to successfully create and manage SOLIDWORKS drawing documents. Users will review video lessons detailing the various processes and procedures used to create drawings, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 4 hrs.    

Prerequisites

Designers and engineers looking to gain a detailed understanding of drawings in SOLIDWORKS 2014.


View More Details
SOLIDWORKS 2014 DriveWorksXpress
image
Overview
One of the best tools for design automation included with SOLIDWORKS is DriveWorksXpress. In this course, you`ll learn how ea more...sy it is to design for multiple model variations using DriveWorksXpress, replacing the need for models with large and complex configurations. Key Topics include creating a DriveWorksXpress database, capturing model data, creating an input form, and creating rules to drive model variations.

 2 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2014 and equation definitions.


View More Details
SOLIDWORKS 2014 Electrical Routing
image
Overview
This course is designed to teach you how to create and manage both electrical and conduit routes using the SOLIDWORKS Routing more... add-in. Included in this course is an overview of how to create electrical routing components and their design requirements. Users will also learn how to document wire information, create flattened route/harness drawings, and use custom libraries. Key topics include: routing options, system options, library components, Excel, cable route, manual route, from/to list, reroute, coverings, flatten route drawings, pipe/conduit route, electrical route, and flexible conduit.

 2 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS - Sketching, Parts and Features, Assemblies , and Drawings.


View More Details
SOLIDWORKS 2014 Essentials for New Users
image
Overview
The SOLIDWORKS Essentials course is intended for users to learn basic topics such as sketching, parts & features, modificatio more...ns, assemblies, tools, and drawings. Upon completion of this course, you should have a solid foundation to help you get started designing in SolidWorks. Users will be presented with detailed lessons, procedures and projects to practice what you have learned. After completing the course, an assessment is available for users to test their knowledge and see what topics they need to review.

 10 hrs.    

Prerequisites


View More Details
SOLIDWORKS 2014 Flow Simulation
image
Overview
SOLIDWORKS Flow Simulation is a full featured Computation fluid dynamics (CFD) program that simplifies your computational flu more...id dynamic studies, making them more accessible to the average user. Where FloXpress has its limitations, Flow Simulation provides increased parameter and boundary control, a variety of plots, mesh refinement, and transient analysis. Use it to simulate liquid and gas flow in real world conditions, run "what if" scenarios, heat transfer studies, and much more. The SOLIDWORKS Flow Simulation 2014 course will teach you how to set up, run and view results of a fluid flow and/or heat transfer analysis using SOLIDWORKS Flow Simulation. It will guide you through the necessary commands, menus, and options required to run a Flow Simulation analysis. Project lessons let you practice various simulation studies, helping you to reinforce what you`ve learned.

 4 hrs.    

Prerequisites

An Essentials level of competency using SOLIDWORKS 2014. Experience with CFD analysis is highly recommended, but not required. Additionally, you can gain a cursory knowledge of Flow Simulation by reviewing the SOLIDWORKS FloXpress course in i GET IT.


View More Details
SOLIDWORKS 2014 FlowXpress
image
Overview
SOLIDWORKS FloXpress 2014 is a first pass qualitative flow analysis tool which gives insight into water or air flow inside yo more...ur SOLIDWORKS model. In this course you will learn how to set up a model, define condition inputs, and run analyses. To get more quantitative results like pressure drop, flow rate, etc the more robust Flow Simulation add-inn would be required.

 3 hrs.    

Prerequisites

A basic knowledge of SOLIDWORKS 2014


View More Details
SOLIDWORKS 2014 Managing Large Assemblies
image
Overview
The Managing Large Assemblies course is intended to teach users about the SOLIDWORKS tools, techniques, and features designed more... to help manage large assemblies and make them efficient. You will learn how to configure and setup your workstation and also learn assembly structure organization techniques to help you work more efficiently. You will also practice creating configurations to facilitate quicker and easier access to components. Upon completion of this course, you will have the knowledge and skills necessary to work efficiently and effectively in large assemblies. Included in this course are the best practices for modeling techniques to create faster performing parts.

 4 hrs.    

Prerequisites

An Essentials level of competency in SOLIDWORKS.


View More Details
SOLIDWORKS 2014 Mold Design Essentials
image
Overview
This course is intended to teach users how to create molds for parts using the various mold automation tools available in SOL more...IDWORKS. The course initially walks users through industry standards and mold design basics, providing you with a foundation for your mold designs. The second half of the course shows SOLIDWORKS mold designers how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. Key topics include: Scaling for Shrinkage, Core Features, Body Feature History, Mold Assembly, and Resolving Draft Problems.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS functionality and plastic part design.


View More Details
SOLIDWORKS 2014 Motion
image
Overview
This course is designed to teach you the fundamentals of creating and running Motion studies for your SOLIDWORKS models, from more... simple animations to dynamic motion analyses. You will learn what Motion is and what you can do with it, the basic concepts involved in a motion study, how to define contact and friction, CAM integration, motion optimization, and how Motion works with SOLIDWORKS Simulation.

 4 hrs.    

Prerequisites

A clear understanding of SOLIDWORKS assembly modeling practices, including mates. An understanding of basic physical principles will be helpful, but is not required.


View More Details
SOLIDWORKS 2014 Parts and Features
image
Overview
The SOLIDWORKS 2014 Parts & Features course is intended for users who have learned the essentials of sketching in SOLIDWORKS more...and want to advance to part and feature creation. Upon completion of this course, you should have the knowledge required to progress to assembly and drawing creation in SOLIDWORKS. Users will review video lessons detailing the various processes and procedures used to model parts. Intermittent project lessons let you practice and reaffirm what you learn.

 3 hrs.    

Prerequisites

An essentials-level knowledge of SOLIDWORKS sketching.


View More Details
SOLIDWORKS 2014 Piping and Tubing
image
Overview
The SOLIDWORKS Piping and Tubing course teaches you how to create and manage both pipe and tube routes. Included in the cours more...e is an overview of 3D sketching for routing, how to create routing components and their design requirements. You will also learn how to export route data, create route drawings and how to create your own custom fitting libraries. At the end you will go through a workshop and test the basic creation of routing sub assemblies.

 3 hrs.    

Prerequisites

SOLIDWORKS users who need to add pipe or tube routes to their assemblies.


View More Details
SOLIDWORKS 2014 Sheet Metal Design
image
Overview
This course was created to teach you how use the tools provided in SOLIDWORKS for sheet metal part design. Learn how to creat more...e drawings of sheet metal parts as well as how to create sheet metal parts using top-down design techniques. Additionally, a number of specialized and unique applications of sheet metal parts are covered, including shell features, cylindrical parts, conical parts, lofts, reverse fold solutions, vents, and flat patterns. Upon completion of this course, you`ll be ready to create your own sheet metal parts in SolidWorks 2014.

 4 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2014 and Sheet Metal fabrication.


View More Details
SOLIDWORKS 2014 Simulation Basic
image
Overview
This course covers SOLIDWORKS 2014 Simulation Basics, including understanding finite element analysis (FEA), the benefits to more...Simulation, the different types of FEA analyses available with SOLIDWORKS Simulation and simplifying design studies. You will also learn how to perform and understand linear static analysis in detail.

 2 hrs.    

Prerequisites

An understanding of Statics, Strength of Materials, and how to navigate SOLIDWORKS. An active license of SOLIDWORKS 2014 Simulation Professional or Premium.


View More Details
SOLIDWORKS 2014 Sketching
image
Overview
The SOLIDWORKS 2014 Sketching course provides you with the basics and best practices used when creating sketches in SOLIDWORK more...S . You will learn how to use the various sketching commands, how to sketch efficiently, and how to manage your sketches. You will also study sketch blocks, splines and 3D sketches. Upon completion of this course, you should have the knowledge required to successfully create and manage sketches in SOLIDWORKS . Users will review video lessons detailing the various processes and procedures used to sketch model geometry, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS or completion of i GET IT`s SOLIDWORKS Essentials for Users.


View More Details
SOLIDWORKS 2014 Surface Design
image
Overview
The SOLIDWORKS 2014 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You`ll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you`ll be ready to start working with complex surfaces.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS .


View More Details
SOLIDWORKS 2014 Top-Down Design Best Practices
image
Overview
This course topic is intended to teach users about the SOLIDWORKS assembly tools and features designed to help create parts i more...n the context of an assembly. This is known as Top-Down design, and it is a powerful way of working in a conceptual design environment using existing geometry in an assembly to base your design on. Upon completion of this course you`ll be ready to build your own assemblies in SOLIDWORKS.

 2 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS or completion of i GET IT`s SOLIDWORKS Essentials for Users.


View More Details
SOLIDWORKS 2014 Update from 2013
image
Overview
The SOLIDWORKS 2014 Update from 2013 course is intended to help users learn what`s new in SOLIDWORKS 2014. This course explor more...es changes and enhancements to the user interface, model display, SOLIDWORKS fundamentals, sketching, parts and features, assemblies, and drawings. Upon completion of this course, you`ll be well versed in the new features available in SOLIDWORKS 2014.

 3 hrs.    

Prerequisites

Experience with prior versions of SOLIDWORKS.


View More Details
SOLIDWORKS 2014 Weldments
image
Overview
This course is designed to teach users how to work with weldments in SOLIDWORKS 2014. You’ll learn how to create weldments, a more...pply welds, manage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SOLIDWORKS 2014 for your weldments. The course duration is approximately 3 hours and 30 minutes.

 3 hrs.    

Prerequisites

A basic knowledge of SOLIDWORKS 2014 modeling practices and working in the 3D Sketching Environment.


View More Details
SOLIDWORKS PhotoView 360
image
Overview
The SOLIDWORKS PhotoView 360 course is intended to provide you with easy-to-use rendering capabilities to create photo-realis more...tic images, adding visual impact to presentations and proposals. In addition to learning how to activate the PhotoView 360 add-in and navigate the interface, you`ll learn how to work with materials, use scenes and lighting, and create and apply decals. Upon completion of this course, you`ll be able to create powerful photo-realistic images of your models. This course includes comprehensive lessons and practice projects, along with a related assessment to reinforce and test what you learn.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS or completion of i GET IT`s SOLIDWORKS Essentials for New Users.


View More Details
SOLIDWORKS 2013 Assemblies
image
Overview
The SOLIDWORKS 2013 Assemblies course is intended for users who have learned the essentials of part creation in SOLIDWORKS an more...d want to advance to assembly creation. Upon completion of this course, you should have the knowledge required to successfully build and manage SOLIDWORKS assembly documents. Users will review video lessons detailing the various processes and procedures used to create assemblies, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 2 hrs.    

Prerequisites

An essentials-level knowledge of sketching and part modeling.


View More Details
SOLIDWORKS 2013 Drawings
image
Overview
This course is intended to teach SOLIDWORKS users how to create engineering drawings for parts and assemblies using SOLIDWORK more...S 2013. Key topics include: part drawings, assembly drawings, orthographic views, dimensions and annotations, layers, notes, blocks, perspective views, hide/show components, drawing sheets, flat pattern views, section views, cutaway section views, broken views, drawing templates, ballooning, tables, detached drawings, edge display, importing DXF/DWG data, and drawing references. Upon completion of this course, you should have the knowledge required to successfully create and manage SOLIDWORKS drawing documents. Users will review video lessons detailing the various processes and procedures used to create drawings, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 4 hrs.    

Prerequisites

Designers and engineers looking to gain a detailed understanding of drawings in SOLIDWORKS 2013.


View More Details
SOLIDWORKS 2013 DriveWorksXpress
image
Overview
One of the best tools for design automation included with SOLIDWORKS is DriveWorksXpress. In this course, you`ll learn how ea more...sy it is to design for multiple model variations using DriveWorksXpress, replacing the need for models with large and complex configurations. Key Topics include creating a DriveWorksXpress database, capturing model data, creating an input form, and creating rules to drive model variations.

 2 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2013 and equation definition.


View More Details
SOLIDWORKS 2013 Electrical Routing
image
Overview
This course is designed to teach you how to create and manage both electrical and conduit routes using the SOLIDWORKS Routing more... add-in. Included in this course is an overview of how to create electrical routing components and their design requirements. Users will also learn how to document wire information, create flatten route/harness drawings, and use custom libraries. Key topics include: routing options, system options, library components, Excel, cable route, manual route, from/to list, reroute, coverings, flatten route drawings, pipe/conduit route, electrical route, and flexible conduit.

 2 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2013 - Sketching, Parts and Features, Assemblies , and Drawings.


View More Details
SOLIDWORKS 2013 Essentials for New Users
image
Overview
The SOLIDWORKS Essentials course is intended for users to learn basic topics such as sketching, parts & features, modificatio more...ns, assemblies, tools, and drawings. Upon completion of this course, you should have a solid foundation to help you get started designing in SOLIDWORKS. Users will be presented with detailed lessons, procedures and projects to practice what you have learned. After completing the course, an assessment is available for users to test their knowledge and see what topics they need to review.

 10 hrs.    

Prerequisites

None


View More Details
SOLIDWORKS 2013 Flow Simulation
image
Overview
SOLIDWORKS Flow Simulation is a full featured Computation fluid dynamics (CFD) program that simplifies your computational flu more...id dynamic studies, making them more accessible to the average user. Where FloXpress has its limitations, Flow Simulation provides increased parameter and boundary control, a variety of plots, mesh refinement, and transient analysis. Use it to simulate liquid and gas flow in real world conditions, run "what if" scenarios, heat transfer studies, and much more. The SOLIDWORKS Flow Simulation 2013 course will teach you how to set up, run and view results of a fluid flow and/or heat transfer analysis using SolidWorks Flow Simulation. It will guide you through the necessary commands, menus, and options required to run a Flow Simulation analysis. Project lessons let you practice various simulation studies, helping you to reinforce what you`ve learned.

 4 hrs.    

Prerequisites

An Essentials level of competency using SOLIDWORKS 2013. Experience with CFD analysis is highly recommended, but not required. Additionally, you can gain a cursory knowledge of Flow Simulation by reviewing the SOLIDWORKS FloXpress course in i GET IT.


View More Details
SOLIDWORKS 2013 FloXpress
image
Overview
SOLIDWORKS FloXpress 2013 is a first pass qualitative flow analysis tool which gives insight into water or air flow inside yo more...ur SOLIDWORKS model. You will learn how to set up a model, define condition inputs, and run analyses. To get more quantitative results like pressure drop, flow rate, etc the more robust Flow Simulation add-inn would be required.

 3 hrs.    

Prerequisites

A basic knowledge of SOLIDWORKS 2013


View More Details
SOLIDWORKS 2013 Managing Large Assemblies
image
Overview
The Managing Large Assemblies course is intended to teach users about the SOLIDWORKS tools, techniques, and features designed more... to help manage large assemblies and make them efficient. You will learn how to configure and setup your workstation and also learn assembly structure organization techniques to help you work more efficiently. You will also practice creating configurations to facilitate quicker and easier access to components. Upon completion of this course, you will have the knowledge and skills necessary to work efficiently and effectively in large assemblies. Included in this course are the best practices for modeling techniques to create faster performing parts..

 4 hrs.    

Prerequisites

Essentials level of competency in SOLIDWORKS.


View More Details
SOLIDWORKS 2013 Mold Design Essentials
image
Overview
This course is intended to teach users how to create molds for parts using the various mold automation tools available in SOL more...IDWORKS. The course initially walks users through industry standards and mold design basics, providing you with a foundation for your mold designs. The second half of the course shows SOLIDWORKS mold designers how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. Key topics include: Scaling for Shrinkage, Core Features, Body Feature History, Mold Assembly, and Resolving Draft Problems.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS functionality and plastic part design.


View More Details
SOLIDWORKS 2013 Motion
image
Overview
This course is designed to teach you the fundamentals of creating and running Motion studies for your SOLIDWORKS models, from more... simple animations to dynamic motion analyses. You will learn what Motion is and what you can do with it, the basic concepts involved in a motion study, how to define contact and friction, CAM integration, motion optimization, and how Motion works with SOLIDWORKS Simulation.

 4 hrs.    

Prerequisites

A clear understanding of SOLIDWORKS assembly modeling practices, including mates. An understanding of basic physical principles will be helpful, but is not required.


View More Details
SOLIDWORKS 2013 Parts and Features
image
Overview
The SOLIDWORKS 2013 Parts & Features course is intended for users who have learned the essentials of sketching in SOLIDWORKS more...and want to advance to part and feature creation. Upon completion of this course, you should have the knowledge required to progress to assembly and drawing creation in SOLIDWORKS. Users will review video lessons detailing the various processes and procedures used to model parts. Intermittent project lessons let you practice and reaffirm what you learn.

 3 hrs.    

Prerequisites

An essentials-level knowledge of SOLIDWORKS sketching.


View More Details
SOLIDWORKS 2013 PhotoView 360
image
Overview
The SOLIDWORKS PhotoView 360 (previously called PhotoWorks) course is intended to provide you with easy-to-use rendering capa more...bilities to create photo-realistic images, adding visual impact to presentations and proposals. In addition to learning how to activate the PhotoView 360 add-in and navigate the interface, you`ll learn how to work with materials, use scenes and lighting, and create and apply decals. Upon completion of this course, you`ll be able to create powerful photo-realistic images of your models. This course includes comprehensive lessons and practice projects, along with a related assessment to reinforce and test what you learn.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS or completion of i GET IT`s SOLIDWORKS Essentials for New Users.


View More Details
SolidWorks 2013 Piping and Tubing
image
Overview
The SolidWorks Piping and Tubing course teaches you how to create and manage both pipe and tube routes. Included in the cours more...e is an overview of 3D sketching for routing, how to create routing components and their design requirements. You will also learn how to export route data, create route drawings and how to create your own custom fitting libraries. At the end you will go through a workshop and test the basic creation of routing sub assemblies.

 3 hrs.    

Prerequisites

SolidWorks users who need to add pipe or tube routes to their assemblies.


View More Details
SOLIDWORKS 2013 Sheet Metal Design
image
Overview
This course was created to teach you how use the tools provided in SOLIDWORKS for sheet metal part design. Learn how to creat more...e drawings of sheet metal parts as well as how to create sheet metal parts using top-down design techniques. Additionally, a number of specialized and unique applications of sheet metal parts are covered, including shell features, cylindrical parts, conical parts, lofts, reverse fold solutions, vents, and flat patterns. Upon completion of this course, you`ll be ready to create your own sheet metal parts in SOLIDWORKS 2013.

 4 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2013 and Sheet Metal fabrication.


View More Details
SOLIDWORKS 2013 Sketching
image
Overview
The SOLIDWORKS 2013 Sketching course provides you with the basics and best practices used when creating sketches in SOLIDWORK more...S. You will learn how to use the various sketching commands, how to sketch efficiently, and how to manage your sketches. You will also study sketch blocks, splines and 3D sketches. Upon completion of this course, you should have the knowledge required to successfully create and manage sketches in SOLIDWORKS. Users will review video lessons detailing the various processes and procedures used to sketch model geometry, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS or completion of i GET IT`s SOLIDWORKS Essentials for Users.


View More Details
SOLIDWORKS 2013 Surface Design
image
Overview
The SOLIDWORKS 2013 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You`ll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you`ll be ready to start working with complex surfaces.

 3 hrs.    

Prerequisites

A basic understanding of SOLIDWORKS 2013.


View More Details
SOLIDWORKS 2013 Update from 2012
image
Overview
The SOLIDWORKS 2013 Update from 2012 course is intended to help users learn what`s new in SOLIDWORKS 2013. This course explor more...es changes and enhancements to the user interface, model display, SOLIDWORKS fundamentals, sketching, parts and features, assemblies, drawings, routing, sheet metal, sustainability, costing, and simulation. Upon completion of this course, you`ll be well versed in the new features available in SOLIDWORKS 2013.

 4 hrs.    

Prerequisites

Experience with prior versions of SOLIDWORKS.


View More Details
SOLIDWORKS 2013 Weldments
image
Overview
This course is designed to teach users how to work with weldments in SOLIDWORKS 2013. You’ll learn how to create weldments, a more...pply welds, manage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SOLIDWORKS 2013 for your weldments. The course duration is approximately 3 hours and 30 minutes.

 3 hrs.    

Prerequisites

A basic knowledge of SOLIDWORKS 2013 modeling practices and working in the 3D Sketching Environment.


View More Details
SolidWorks 2012 Assemblies
image
Overview
The SolidWorks 2012 Assemblies course is intended for users who have learned the essentials of part creation in SolidWorks an more...d want to advance to assembly creation. Upon completion of this course, you should have the knowledge required to successfully build and manage SolidWorks assembly documents. Users will review video lessons detailing the various processes and procedures used to create assemblies, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 2 hrs.    

Prerequisites

An essentials-level knowledge of sketching and part modeling.


View More Details
SolidWorks 2012 Drawings
image
Overview
This course is intended to teach SolidWorks users how to create engineering drawings for parts and assemblies using SolidWork more...s 2012. Key topics include: part drawings, assembly drawings, orthographic views, dimensions and annotations, layers, notes, blocks, perspective views, hide/show components, drawing sheets, flat pattern views, section views, cutaway section views, broken views, drawing templates, ballooning, tables, detached drawings, edge display, importing DXF/DWG data, and drawing references. Upon completion of this course, you should have the knowledge required to successfully create and manage SolidWorks drawing documents. Users will review video lessons detailing the various processes and procedures used to create drawings, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 4 hrs.    

Prerequisites

An essentials-level understanding of part or assembly modeling with SolidWorks 2012.


View More Details
SolidWorks 2012 DriveWorksXpress
image
Overview
One of the best tools for design automation included with SolidWorks, is DriveWorksXpress. In this course, you`ll learn how e more...asy it is to design for multiple model variations using DriveWorksXpress, replacing the need for models with large and complex configurations. Key Topics include creating a DriveWorksXpress database, capturing model data, creating and input form, and creating rules to drive model variations.

 2 hrs.    

Prerequisites

A basic understanding of SolidWorks 2012 and defining equations.


View More Details
SolidWorks 2012 Electrical Routing
image
Overview
This course is designed to teach you how to create and manage both electrical and conduit routes using the SolidWorks Routing more... add-in. Included in this course is an overview of how to create electrical routing components and their design requirements. Users will also learn how to document wire information, create flatten route/harness drawings, and use custom libraries. Key topics include: routing options, system options, library components, Excel, cable route, manual route, from/to list, reroute, coverings, flatten route drawings, pipe/conduit route, electrical route, and flexible conduit.

 2 hrs.    

Prerequisites

A basic understanding of SolidWorks 2012 - Sketching, Drawings, and Assemblies.


View More Details
SolidWorks 2012 Essentials for New Users
image
Overview
The SolidWorks Essentials course is intended for users to learn basic topics such as sketching, features, modifications, asse more...mblies, tools, and drawings. Upon completion of this course, you should have a solid foundation to help you get started designing in SolidWorks. Users will be presented with detailed lessons, procedures and projects to practice what you have learned. After completing the course, an assessment is available for users to test their knowledge and see what topics they need to review.

 10 hrs.    

Prerequisites

None


View More Details
SolidWorks 2012 Flow Simulation
image
Overview
SolidWorks Flow Simulation is a full featured Computation fluid dynamics (CFD) program that simplifies your computational flu more...id dynamic studies, making them more accessible to the average user. Where FloXpress has its limitations, Flow Simulation provides increased parameter and boundary control, a variety of plots, mesh refinement, and transient analysis. Use it to simulate liquid and gas flow in real world conditions, run "what if" scenarios, heat transfer studies, and much more. The SolidWorks Flow Simulation 2012 course will teach you how to set up, run and view results of a fluid flow and/or heat transfer analysis using SolidWorks Flow Simulation. It will guide you through the necessary commands, menus, and options required to run a Flow Simulation analysis. Project lessons let you practice various simulation studies, helping you to reinforce what you`ve learned.

 4 hrs.    

Prerequisites

An Essentials level of competency using SolidWorks 2012. Experience with CFD analysis is highly recommended, but not required. Additionally, you can gain a cursory knowledge of Flow Simulation by reviewing the SolidWorks FloXpress course in i GET IT.


View More Details
SolidWorks 2012 FloXpress
image
Overview
SolidWorks FloXpress 2012 is a first pass qualitative flow analysis tool which gives insight into water or air flow inside yo more...ur SolidWorks model. You will learn how to set up a model, define condition inputs, and run analyses. To get more quantitative results like pressure drop, flow rate, etc the more robust Flow Simulation add-inn would be required.

 3 hrs.    

Prerequisites

A basic knowledge of SolidWorks 2012


View More Details
SolidWorks 2012 Managing Large Assemblies
image
Overview
The Managing Large Assemblies course is intended to teach users about the SolidWorks tools, techniques, and features designed more... to help manage large assemblies and make them efficient. You will learn how to configure and setup your workstation and also learn assembly structure organization techniques to help you work more efficiently. You will also practice creating configurations to facilitate quicker and easier access to components. Upon completion of this course, you will have the knowledge and skills necessary to work efficiently and effectively in large assemblies. Included in this course are the best practices for modeling techniques to create faster performing parts.

 4 hrs.    

Prerequisites

An Essentials level of competency in SolidWorks.


View More Details
SolidWorks 2012 Mold Design Essentials
image
Overview
This course topic is intended to teach users how to create molds for parts using the various mold automation tools available more...in SolidWorks. The course initially walks users through industry standards and mold design basics, providing a better foundation for your mold designs. The second half of the course shows SolidWorks mold designers how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. Key topics include: scale for shrinkage, core feature, body feature history, mold assembly, and resolving draft problems.

 3 hrs.    

Prerequisites

A basic understanding of SolidWorks functionality and plastic part design.


View More Details
SolidWorks 2012 Parts and Features
image
Overview
The SolidWorks 2012 Parts & Features course is intended for users who have learned the essentials of sketching in SolidWorks more...and want to advance to part and feature creation. Upon completion of this course, you should have the knowledge required to progress to assembly and drawing creation in SolidWorks. Users will review video lessons detailing the various processes and procedures used to model parts. Intermittent project lessons let you practice and reaffirm what you learn.

 3 hrs.    

Prerequisites

An essentials-level knowledge of SolidWorks sketching.


View More Details
SolidWorks 2012 PhotoView 360
image
Overview
The SolidWorks PhotoView 360 (previously called PhotoWorks) course is intended to provide you with easy-to-use rendering capa more...bilities to create photorealistic images, adding visual impact to presentations and proposals. In addition to learning how to activate the PhotoWorks add-in and navigate the interface, you'll understand how to work with materials, use scenes and lighting, and create and apply decals. Upon completion of this course, you'll be able to create powerful photorealistic effects. All training includes comprehensive lessons, procedures, practice projects, and assessments to test their skills.

 3 hrs.    

Prerequisites

A basic understanding of SolidWorks or completion of i GET IT's SolidWorks Essentials for Users.


View More Details
SolidWorks 2012 Piping and Tubing
image
Overview
The SolidWorks Piping and Tubing course teaches you how to create and manage both pipe and tube routes. Included in the cours more...e is an overview of 3D sketching for routing, how to create routing components and their design requirements. You will also learn how to export route data, create route drawings and how to create your own custom fitting libraries.

 2 hrs.    

Prerequisites

A basic understanding of SolidWorks Sketching, Drawing, andTop-down Assembly.


View More Details
SolidWorks 2012 Sheet Metal Design
image
Overview
This course was created to teach you how use the tools provided in SolidWorks for sheet metal part design. Learn how to creat more...e drawings of sheet metal parts as well as create sheet metal parts using top-down design techniques. Additionally, a number of specialized and unique applications of sheet metal parts are covered, including shell features, cylindical parts, conical parts. lofts, reverse fold solutions, vents, and flat patterns. Upon completion of this course, you`ll be ready to create your own sheet metal parts in SolidWorks 2012. The course duration is approximately 2 hours.

 4 hrs.    

Prerequisites

A basic understanding of SolidWorks 2012 and Sheet Metal fabrication.


View More Details
SolidWorks 2012 Simulation - Basics & Static Analysis
image
Overview
This course covers SolidWorks 2012 Simulation basics, including understanding finite element analysis (FEA), the benefits to more...Simulation, the different types of FEA analyses available with SolidWorks Simulation, using SimulationXpress, and simplifying design studies. You will also learn how to perform and understand linear static analyses in detail. The course duration is approximately 2 hours and 25 minutes.

 1 hrs.    

Prerequisites

A Basic understanding of SolidWorks 2012 and an active license of SolidWorks 2012 Simulation.


View More Details
SolidWorks 2012 Sketching
image
Overview
The SolidWorks 2012 Sketching course provides you with the basics and best practices used when creating sketches in SolidWork more...s. You’ll learn how to use the various sketching commands, how to sketch efficiently, and how to manage your sketches. You’ll also study sketch blocks, splines and 3D sketches. Upon completion of this course, you should have the knowledge required to successfully create and manage sketches in SolidWorks. Users will review video lessons detailing the various processes and procedures used to sketch model geometry, while intermittent project lessons let you practice and reaffirm what you learn. Users are encouraged to follow along with each video lesson as well.

 3 hrs.    

Prerequisites

None


View More Details
SolidWorks 2012 Surface Design
image
Overview
The SolidWorks 2012 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You'll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you'll be ready to start working with complex surfaces. The course duration is approximately 3 hours and 3 minutes.

 4 hrs.    

Prerequisites

A basic understanding of SolidWorks 2012.


View More Details
SolidWorks 2012 Top-Down Design Best Practices
image
Overview
This course topic is intended to teach users about the SolidWorks assembly tools and features designed to help create parts i more...n the context of an assembly. This is known as Top-Down design, and it is a powerful way of working in a conceptual design environment using existing geometry in an assembly to base your design on. Upon completion of this course you`ll be ready to build your own assemblies in SolidWorks.

 2 hrs.    

Prerequisites

A basic understanding of SolidWorks or completion of i GET IT`s SolidWorks Essentials for Users.


View More Details
SolidWorks 2012 Update from 2011
image
Overview
The SolidWorks 2012 Update from 2011 course is intended to help users learn what's new in SolidWorks 2012. This course explor more...es changes and enhancements to the user interface, assemblies, drawings, features, sheet metal, sustainablity, simulation, and introduces the SolidWorks Costing tool. Upon completion of this course, you'll be well versed in the new features available in SolidWorks 2012.

 4 hrs.    

Prerequisites

Experience in prior versions of SolidWorks.


View More Details
SolidWorks 2012 Weldments
image
Overview
This course is designed to teach users how to work with weldments in SolidWorks 2012. You’ll learn how to create weldments, m more...anage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SolidWorks 2012 for your weldments. The course duration is approximately 1 hours and 30 minutes.

 2 hrs.    

Prerequisites

A basic knowledge of SolidWorks 2012 modeling practices.


View More Details
SolidWorks 2011 DriveWorksXpress
image
Overview
One of the best tools for design automation included with SolidWorks, is DriveWorksXpress. In this course, you'll learn how more...easy it is to design for multiple model variations using DriveWorksXpress, replacing the need for models with large and complex configurations. Key Topics include creating a DriveWorksXpress database, capturing model data, creating and input form, and creating rules to drive model variations.

 2 hrs.    

Prerequisites

A basic understanding of SolidWorks and equation structure.


View More Details
SolidWorks 2011 Essentials for New Users
image
Overview
The SolidWorks 2011 for New Users course is intended to provide users with an introduction to SolidWorks 2011. You will learn more... the basics of sketching, features, modifications, assemblies, tools, and drawings. Upon completion of this course, you should have a solid foundation to help you get started designing in SolidWorks 2011. This course is presented in a blended format, meaning it is text-based with video and graphic examples presented throughout. The course duration is approximately 2 hours.

 10 hrs.    

Prerequisites

None.


View More Details
SolidWorks 2011 Flow Simulation
image
Overview
SolidWorks 2011 Flow SImulation is a Computational Fluid Dynamics analysis software that will help you solve Fluid Flow, heat more... transfer, HVAC and other Fluid Flow problems. SolidWorks Flow Simulation will help simulate and make sure the intended application meets your needs before the manufacturing process.

 3 hrs.    

Prerequisites

Basic experience with SolidWorks modeling an assembly. SolidWorks Essentials, FloXpress, Modeling, Background knowledge in CFD.


View More Details
SolidWorks 2011 FloXpress
image
Overview
SolidWorks FloXpress 2011 is a first pass qualitative flow analysis tool which gives insight into water or air flow inside yo more...ur SolidWorks model. You will learn how to set up the model and solve it. To get more quantitative results like pressure drop, flow rate etc you will have to use Flow Simulation.

 3 hrs.    

Prerequisites

Basic Knoledge of SolidWorks.


View More Details
SolidWorks 2011 Large Assembly Best Practices
image
Overview
The Large Assemblies Best Practices course is intended to teach users about the SolidWorks 2011 tools and features designed t more...o help manage large assemblies. Included in this course are best practices for modeling techniques to create faster performing parts. You'll also learn assembly structure organization techniques to help you work more efficiently. And, you'll practice creating configurations to facilitate quicker and easier access to components. Upon completion of this course, you will have the skills necessary to work efficiently and effectively in large assemblies. The course duration is approximately 2 hours and 15 minutes.

 4 hrs.    

Prerequisites

A basic understanding of SoliWorks 2011.


View More Details
SolidWorks 2011 Mold Design Essentials
image
Overview
This course topic is intended to teach users how to create molds for parts using the various mold automation tools available more...in SolidWorks. The course shows users how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. Key topics include: scale for shrinkage, core feature, body feature history, mold assembly, and resolving draft problems.

 3 hrs.    

Prerequisites

A basic understanding of SolidWorks


View More Details
SolidWorks 2011 PhotoView 360
image
Overview
The SolidWorks PhotoView 360 course is intended to provide you with easy-to-use rendering capabilities to create photorealist more...ic images, adding visual impact to presentations and proposals. In addition to learning how to activate the PhotoView 360 add-in and navigate the interface, you'll understand how to work with materials, use scenes and lighting, and create and apply decals. Upon completion of this course, you'll be able to create powerful photorealistic effects. All training includes comprehensive lessons, procedures, practice projects, and assessments to test their skills.

 3 hrs.    

Prerequisites

A basic understanding of SolidWorks or completion of i GET IT's SolidWorks Essentials for Users.


View More Details
SolidWorks 2011 Routing
image
Overview
The SolidWorks 2011 Routing course is designed to teach you how to create and manage pipe, tube, electrical, and conduit rout more...es. Topics include 3D sketching for routing, routing components, routing drawings, electrical routing components, custom libraries, rerouting, and system options. Upon completion of this course, you’ll be ready to create electrical and conduit routes, as well as pipe and tube routes. The course duration is approximately 3 hours and 6 minutes.

 3 hrs.    

Prerequisites

A basic understanding of SolidWorks 2011.


View More Details
SolidWorks 2011 Routing
image
Overview
The SolidWorks 2011 Routing course is designed to teach you how to create and manage pipe, tube, electrical, and conduit rout more...es. Topics include 3D sketching for routing, routing components, routing drawings, electrical routing components, custom libraries, rerouting, and system options. Upon completion of this course, you’ll be ready to create electrical and conduit routes, as well as pipe and tube routes. The course duration is approximately 3 hours and 6 minutes.

 3 hrs.    

Prerequisites

A basic understanding of SolidWorks 2011.


View More Details
SolidWorks 2011 Sheet Metal Design
image
Overview
This course was created to teach you how use the tools provided in SolidWorks for sheet metal part design. Learn how to creat more...e drawings of sheet metal parts as well as create sheet metal parts using top-down design techniques. Additionally, a number of specialized and unique applications of sheet metal parts are covered including shell features, cylindical parts, conical parts. lofts, reverse fold solutions, vents, and flat patterns. Upon completion of this course, you'll be ready to create your own sheet metal parts in SolidWorks 2011. The course duration is approximately 2 hours.

 3 hrs.    

Prerequisites

A basic understanding of SolidWorks 2011 and Sheet Metal fabrication.


View More Details
SolidWorks 2011 Simulation - Basics & Static Analysis
image
Overview
This course covers SolidWorks 2011 Simulation basics, including understanding finite element analysis (FEA), the benefits to more...Simulation, the different types of FEA analyses available with SolidWorks Simulation, using SimulationXpress, and simplifying design studies. You will also learn how to perform and understand linear static analyses in detail. The course duration is approximately 2 hours and 25 minutes.

 2 hrs.    

Prerequisites

A Basic understanding of SolidWorks 2011 and an active license of SolidWorks 2011 Simulation.


View More Details
SolidWorks 2011 Sketching
image
Overview
The SolidWorks 2011 Sketching video course provides you with an overview of tools and techniques you can use to help you sket more...ch more effectively in SolidWorks 2011. You’ll learn how to sketch efficiently and how to manipulate your sketches. You’ll also study sketch blocks, splines and 3D sketches. Upon completion of this course, you’ll be ready to create sketches in SolidWorks 2011. The course duration is approximately 3 hours and 7 minutes.

 3 hrs.    

Prerequisites

A basic understanding of SolidWorks.


View More Details
SolidWorks 2011 Surface Design
image
Overview
The SolidWorks 2011 Surface Design course is intended to teach users how to generate complex surfaces using lofts and sweeps more...with guide curves. You`ll also learn techniques for editing surfaces including trim, extend, fillet and knit surfaces. Upon completion of this course, you`ll be ready to start working with complex surfaces. The course duration is approximately 3 hours and 3 minutes.

 4 hrs.    

Prerequisites

A basic understanding of SolidWorks.


View More Details
SolidWorks 2011 Top-Down Design Best Practices
image
Overview
This course is intended to teach users about the SolidWorks tools and features designed to help create parts in the context o more...f an assembly. This is known as top-down design, and it is a powerful way of working in a conceptual design environment using existing geometry in an assembly to base your design on. Upon completion of this course you'll be ready to build your own assemblies in SolidWorks 2011. The course duration is approximately 2 hours and 43 minutes.

 2 hrs.    

Prerequisites

A basic understanding of Solidworks 2011.


View More Details
SolidWorks 2011 Update from 2010
image
Overview
The SolidWorks 2011 Update Training course is intended to help users learn what's new in SolidWorks 2011. This course explore more...s changes and enhancements to the user interface, assemblies, drawings, features, sheet metal, and Weldments. Upon completion of this course, you'll be ready to start using SolidWorks 2011.

 4 hrs.    

Prerequisites

Experience in prior versions of SolidWorks.


View More Details
SolidWorks 2011 Weldments
image
Overview
This course is designed to teach users how to work with weldments in SolidWorks 2011. You’ll learn how to create weldments, m more...anage weldments, and document your weldments in drawings. Upon completion of this course, you’ll have the tools you need to use SolidWorks 2011 for your weldments. The course duration is approximately 1 hours and 27 minutes.

 2 hrs.    

Prerequisites

A basic understanding of SolidWorks 2011.


View More Details
SOLIDWORKS CSWA Prep Workshop
image
Overview
The SOLIDWORKS Associate Certificate Kickstarter employs unique methods and models to teach you how to earn your SOLIDWORKS A more...ssociate's certification. Using fun and engaging examples, we'll start off with SOLIDWORKS basics, including how to activate the program and create your first sketch. Next, you'll transition into intermediate skills, such as how to fully define a sketch. Then you'll learn more advanced techniques. Like how to model applied features like fillets and chamfers. Once you've got part modeling down, you move on to assembly creation, learning how to combine individual parts. Then finish, by learning how to communicate your designs using drawings.

 3 hrs.    

Prerequisites

An installation of SOLIDWORKS and the willingness to learn.


View More Details
SOLIDWORKS CSWP Preparation
image
Overview
This course is intended to help you prepare for the SOLIDWORKS CSWP exam. Beginning with overview of what to expect when taki more...ng the CSWP, you'll learn about exam criteria, skills to focus on, and how to get started taking the exam. You will also be presented with three practice segments that simulate what the actual exam experience is like. Each segment is interactive, allowing you work through a modeling project and provide answers based on the completed portions of the project. You will be shown your exam results upon completion of these segments.

 3 hrs.    

Prerequisites

A working knowledge of SOLIDWORKS and an installation of SOLIDWORKS 2015 or newer.


View More Details
SolidWorks 2007 Electrical Systems
image
Overview
This course is designed to teach you how to create and manage both electrical and conduit routes using the SolidWorks Routing more... add-in. Included in this course is an overview of how to create electrical routing components and their design requirements. Students will also learn how to document wire information, create nail board/harness drawings, and use custom libraries. Key topics include: routing options, system options, library components, Excel, cable route, manual route, from/to list, reroute, coverings, nail board, drawings, pipe/conduit route, electrical route, and flexible conduit.

 Not Available    

Prerequisites

A basic understanding of SolidWorks.


View More Details
SolidWorks 2007 Large Assembly Best Practice
image
Overview
This course is intended to teach users about the SolidWorks tools and features designed to help manage large assemblies. Incl more...uded in this course are best practices for modeling techniques to create faster performing parts, assembly structure organization, and creating configurations to facilitate quicker and easier access to components. Key topics include: images, fully defined sketches, patterns, model symmetry, material mapping, cosmetic thread, loft, sweep, fillet, chamfer, simplified configuration, toolbox parts, SolidWorks Utilities, custom properties, design binder, dumb models, text, folders, subassemblies, mates, configurations, statistics, performance options, large assembly mode, lock external references, advanced show/hide, envelope, display states, and task scheduler.

 3.58    

Prerequisites

A basic understanding of SolidWorks


View More Details
SolidWorks 2007 Mold Design Essentials
image
Overview
This course is intended to teach users how to create molds for parts using the various mold automation tools available in Sol more...idWorks. This course shows users how to insert Parting Lines, apply Tooling Splits, generate Parting Surfaces, and apply Shut-off Surfaces. Users will also learn how to analyze parts for mold design using Draft Analysis and Undercut Detection. An overview of the MoldflowXpress plastic fill analysis tool is also featured. Key topics include: move face, scale for shrinkage, core feature, body feature history, mold assembly, and resolving fill problems.

 1 hrs 30 min.    

Prerequisites

A basic understanding of SolidWorks.


View More Details
SolidWorks 2007 PhotoWorks
image
Overview
This course is intended to provide users with easy-to-use rendering capabilities to create photorealistic images that add vis more...ual impact to presentations and proposals. Users will learn how to create powerful photorealistic effects. Key topics include: render wizard, materials, illumination properties, surface finish, configurations, custom library, linking, backgrounds, showrooms, color mask, image mask, decals, contour rendering, illumination, caustic illumination, global illumination, camera view, and render.

 Not Available    

Prerequisites

A basic understanding of SolidWorks.


View More Details
SolidWorks 2007 Piping and Tubing
image
Overview
The SolidWorks piping and tubing course teaches you how to create and manage both pipe and tube routes. Included in the cours more...e is an overview of 3D sketching for routing, how to create routing components and their design requirements. You will also learn how to export route data, create route drawings and how to create your own custom fitting libraries. Course completion time: 4 Hours.

 Not Available    

Prerequisites

A basic understanding of SolidWorks.


View More Details
SolidWorks 2007 Sheet Metal Design
image
Overview
This course is designed to teach you how to apply all of the tools provided in SolidWorks for sheet metal part design. You wi more...ll also learn how to create drawings of sheet metal parts and create sheet metal parts using top down design techniques. Additionally, a number of specialized and unique applications of sheet metal parts are covered. Key topics include: K-factor, bend allowance, bend deduction, bend tables, basic flange, edge flange, multiple edge flange, curved edge flange, miter flange, flat pattern, break corner, corner trim, fold/unfold, hem, tab, jog, punch, design library, annotation, view, show/hide, sheet metal drawing, process drawing, flat state, lofted bend, vent, and fill pattern.

 7 hrs.    

Prerequisites

A basic understanding of SolidWorks and Sheet Metal fabrication.


View More Details
SolidWorks 2007 Sketching
image
Overview
This course is intended to provide users with an overview of tools and techniques to help sketch more effectively in SolidWor more...ks. Key topics include: autotransitioning, construction geometry, mirror, fully defined sketch, trim, extend, offset, model annotations, lock dimension, tangency, pattern, SketchXpert, sketch block, library, belt, chain, traction relation, path, animation, simulation, splines, fit spline, and 3D sketch.

 3 hrs 15 min.    

Prerequisites

A basic understanding of SolidWorks.


View More Details
SolidWorks 2007 Surface Design
image
Overview
This course is intended to teach users how to generate complex surfaces in SolidWorks. Users will also learn how to edit surf more...aces. Key topics include: C0 & C1 Curvature, C1 & C2 curvature, splines, Fit Spline tool, loft section, intersection curve, face curve, trim, draft, fillet, thicken, projected curve, sweep guide, selection manager, boundary feature, freeform feature, flex feature, import options, fill surface, ruled surface, and move/copy body.

 Not Available    

Prerequisites

A basic understanding of SolidWorks.


View More Details
SolidWorks 2007 Top Down Design Best Practice
image
Overview
This update training course is intended to introduce users to the system enhancements and new functionality added for Sketchi more...ng, Parts and Features, Sheet Metal Design, Assemblies, Drawings, and SolidWorks Add-ins. Key topics include: library, auto-recover, 3D PDF, search, explorer, belt & chain, file management, spline, lock dimension, sketch pattern, parts & features, configure multibody, selection manger, boundary feature, freeform feature, COSMOSXpress part optimization, FesatureXpert, FilletXpert, DraftXpert, sheet metal, corner trim, transform sketches, edge flange, lofted bends, assembly, smart hole series, MateXpert, gear ratios, drawing, broken view, relative view, View Palette, annotation, balloons, drawing blocks, hole table, revision table, DimXpert, eDrawings, stamp, hem, pattern, PDMWorks, material mapping, PhotoWorks, Scan To3D, Surface Wizard, Animator, Design Checker, routing, toolbox, Staggered Smart Fastener, and utilities.

 Not Available    

Prerequisites

A basic understanding of SolidWorks and SolidWorks Toolbox Add-in.


View More Details
SolidWorks 2007 Update from 2006
image
Overview
In the SolidWorks 2007 Update training course you will learn about system enhancements and new functionality added for Sketch more...ing, Parts and Features, Sheet Metal Design, Assemblies, Drawings, and the SolidWorks Add-ins. Course completion time: 8 Hours.

 9 hrs 45 min.    

Prerequisites

A basic understanding of any previous release of SolidWorks.


View More Details
SolidWorks 2007 Weldments
image
Overview
This course is designed to teach users how to create, manage, and document weldments in SolidWorks. Key topics include: Weldm more...ents toolbar, 3D sketch, structural members, profile pierce point, trim extend, complex joints, gussets, end caps, fillet beads, custom profiles, sub-weldments, feature scope, cut lists, custom properties, ballooning, and weld symbols.

 3 hrs 15 min.    

Prerequisites

A basic understanding of SolidWorks.


View More Details



Most Popular Courses

image
SOLIDWORKS 2024 Essentials for New Users
This course is designed for both new and experienced users looking to learn the essentials for mechanical design in SOLIDWORK more...S. The five-part course includes: Getting Started with SOLIDWORKS & learning the User Interface, Sketching, Part & Feature creation, Assembly modeling, Drawing & Detailing. Small quizzes, and challenge projects, allow you to practice and reaffirm what you learn along the way. As with all i GET IT self-paced courses, you can start at the beginning, or jump to any section of the course as needed.

Duration: 24 hrs. Skill level: Basic
image
SOLIDWORKS 2023 Assemblies
In this course, you'll learn SOLIDWORKS assembly basics like how to insert and manage assembly components, you'll discover di more...fferent tools used to review and quality check you assemblies, and you'll get to practice creating and modifying assemblies.

Duration: 6 hrs. Skill level: Basic
image
SOLIDWORKS 2023 Basics & User Interface
In this introductory SOLIDWORKS course, you will see what it's like to launch SOLIDWORKS for the first time, learn how to nav more...igate the user interface and perform essential commands, get an overview of opening and saving files, and explore System Options and Document Settings.

Duration: 3 hrs. Skill level: Basic
image
SOLIDWORKS 2023 Drawings
In this course you will learn how to communicate your SOLIDWORKS designs using Drawings. You'll learn how to insert different more... types of model views and annotations, how to manage views and annotations, how to use Drawing Tables, and you'll get to practice creating various Drawing documents.

Duration: 8 hrs. Skill level: Basic
image
SOLIDWORKS 2023 Essentials for New Users
This course is designed for both new and experienced users looking to learn the essentials for mechanical design in SOLIDWORK more...S. The five-part course includes: Getting Started with SOLIDWORKS & learning the User Interface, Sketching, Part & Feature creation, Assembly modeling, Drawing & Detailing. Small quizzes, and challenge projects, allow you to practice and reaffirm what you learn along the way. As with all i GET IT self-paced courses, you can start at the beginning, or jump to any section of the course as needed.

Duration: 24 hrs. Skill level: Basic
image
SOLIDWORKS 2023 Parts & Features
In this course, you'll learn how to turn sketch geometry into 3D geometry, practice creating Sketched and Applied Features, l more...earn about commonly used sketch tools, and you'll get to complete a series of modeling workshops to practice what you have learned.

Duration: 6 hrs. Skill level: Basic
image
SOLIDWORKS 2023 Sketching
Learn the Basics of Sketching and Sketch Management required to begin modeling in SOLIDWORKS. You'll also learn more advanced more... sketching techniques, like Spline creation and 3D Sketching.

Duration: 24 hrs. Skill level: Basic
image
SOLIDWORKS 2022 Essentials for New Users
This course is designed for both new and experienced users looking to learn the essentials for mechanical design in SOLIDWORK more...S. The five-part course includes: Getting Started with SOLIDWORKS & learning the User Interface, Sketching, Part & Feature creation, Assembly modeling, Drawing & Detailing. Small quizzes, and challenge projects, allow you to practice and reaffirm what you learn along the way. As with all i GET IT self-paced courses, you can start at the beginning, or jump to any section of the course as needed.

Duration: 24 hrs. Skill level: Basic
image
SOLIDWORKS 2021 Essentials for New Users
This course is designed for both new and experienced users looking to learn the essentials for mechanical design in SOLIDWORK more...S. The five-part course includes: Getting Started with SOLIDWORKS & learning the User Interface, Sketching, Part & Feature creation, Assembly modeling, Drawing & Detailing. Small quizzes, and challenge projects, allow you to practice and reaffirm what you learn along the way. As with all i GET IT self-paced courses, you can start at the beginning, or jump to any section of the course as needed.

Duration: 24 hrs. Skill level: Basic
image
SOLIDWORKS Composer Workshops
This course is divided into four separate workshops illustrating different 'deliverables' SW Composer is capable of producing more.... You'll learn how to create Product Manuals, Marketing Images, Product Animations, and how to embed 3D models into a MS Word document. Workshops are recorded live, and are divided into smaller segments so you can review each video at your own pace.

Duration: 7 hrs. Skill level: Intermediate
image
SOLIDWORKS MBD & DimXpert
This course covers the basics of creating and communicating Product Manufacturing Information, or PMI, using SOLIDWORKS MBD a more...nd DimXpert tools. You'll learn what SOLIDWORKS Model Based Definition is, how to attach dimensions and other annotations to a model, how to view and manage annotation views, specialized PMI techniques, how to create custom 3D PDF templates and publish them, and how view 3D PDFs and eDrawings once they've been created.

Duration: 3 hrs. Skill level: Intermediate